|
- 品牌：德國KAYSEN
- 貨號：KS8369679
- 發布日期： 2019-10-12
- 更新日期： 2025-08-21
| 外型尺寸 | |
| 貨號 | KS8369679 |
| 品牌 | KAYSEN |
| 用途 | 抽水、化工、制藥、石油、冶金、染料、冶煉、電力、電鍍、農藥、造紙、食品、紡織等行業酸洗工藝、制酸制堿、噴漆工藝、有色金屬冶煉中的電解液輸送、離子膜項目中的氯水輸送、廢水處理、電鍍、農藥領域。 |
| 型號 | KAYSEN |
| 工作壓差 | 0 |
| 壓力環境 | 常壓 |
| 介質溫度 | 250℃ |
| 驅動方式 | 電動 |
| 適用介質 | 水 |
轉子泵-不銹鋼轉子泵-KAYSEN泵業
GERMANY KAYSEN PUMP CO .,LTD
轉子泵是指通過轉子與泵體間的相對運動來改變工作容積，進而使液體的能量增加的泵。轉子泵是一種旋轉的容積式泵，具有正排量性質，其流量不隨背壓變化而變化。
主要特點：
●沒有吸入閥和排出閥，它們的主要工作部件是泵殼和轉子（如齒輪、螺桿、凸輪等）。
●與往復泵相比，轉子作回轉運動，沒有沖擊，轉速較高，結構緊湊，體積較小。
●排出壓力一般較高，但比往復泵要低，流量比往復泵還要小，效率較低，一般只適用于輸送小量的液體，并大多作為輔助設備來使用。
●大多數轉子泵是依靠本身輸送的液體潤滑的，故一般適用于輸送具有潤滑性和不含固體顆粒的液體。
●轉子泵也是間歇排送液體的，所以流量的波動比離心泵大，比往復泵小，但可看成近似均勻。
●當轉子表面上有液膜存在（輸送潤滑性液體）時，泵將具有自吸能力。
主要應用：
●石油石化行業：含油污水，輕質油，污油，重油，原油的輸轉，汽油、柴油掃倉，甲醇，乙醇卸車工位可以應用轉子泵，替代液下泵以及隔膜泵等。
●市政行業：含固率5%以下剩余污泥，回流污泥輸送，提升處理，離心機供料泵，自來水廠活性炭投加。
●糞便廢水：農場高粘度糞便的輸送，生活廢水輸送，餐廚垃圾輸送。
●移動泵車：市政自來水排水，防洪排澇，農田灌溉。
高粘度轉子泵故障解決方案：
凱森泵業高粘度轉子泵在石化石油工業中完成高粘度液體（如合成橡膠，樹脂，纖維的聚合液等）的輸送，雖高粘度轉子泵很耐用，但是工況現場總會出現一些故障，常見故障有三個，在此說明一下解決方案。
1、異常振動和噪聲
因為高粘度轉子泵工作介質的粘度較高，因而輕易發生吸空現象而激發較大的噪聲。高粘度轉子泵輸送介質的粘度決定介質流動的難易程度，在輸送過程中，流量和壓力的變化，氣泡的破裂都是噪音常見的原因，噪音也影響著高粘度轉子泵的使用壽命。
對策：對于經常工作的壓力較高的高粘度轉子泵工作壓力應比泵的額定壓力低1-2個壓力級。
2、無出口壓力或壓力缺乏
泵并不能發生壓力，它只是輸出流量。壓力低或無壓力，闡明高粘度轉子泵沒有吸入液體或走漏嚴重。
對策：電機輸出功率偏小，高粘度轉子泵排量選得過大或壓力調得過高時，也會形成壓力缺乏。當然，壓力表損壞時也顯現不出壓力，此時可換裝一個新的壓力表搜檢。
3、無流量或出液量缺乏
假如確認泵無流量輸出，可能是因為泵裝置有誤，泵的轉向有問題，或吸入側（進液口及吸液管道）梗塞，出口止回閥裝反或卡死了，也有可能是驅動軸斷裂了。高粘度轉子泵在轉速過低時會引起液量缺乏，這種現象常常是因為泵的驅動安裝打滑或功率缺乏所致。
對策：檢查齒輪泵的實踐轉速，管路、泵與電機的聯接及功率匹配狀況等。
Rotor pump
Emulsifying pump
Positive displacement pump
A rotor pump is a pump that changes the working volume by the relative movement between the rotor and the pump body, thereby increasing the energy of the liquid. The rotor pump is a rotary positive displacement pump with positive displacement properties and its flow rate does not change with back pressure changes.
main feature:
? There are no suction and discharge valves, their main working components are the pump casing and rotor (such as gears, screws, cams, etc.).
● Compared with the reciprocating pump, the rotor performs rotary motion without impact, high speed, compact structure and small volume.
● The discharge pressure is generally higher, but lower than the reciprocating pump. The flow rate is smaller than the reciprocating pump and the efficiency is low. Generally, it is only suitable for conveying a small amount of liquid, and is mostly used as an auxiliary device.
● Most rotor pumps are lubricated by the liquid they are transported, so they are generally suitable for transporting liquids that are lubricious and free of solid particles.
●The rotor pump also intermittently discharges liquid, so the flow fluctuation is larger than the centrifugal pump and smaller than the reciprocating pump, but it can be regarded as approximately uniform.
● When there is a liquid film on the surface of the rotor (transporting lubricious liquid), the pump will have self-priming capability.
main application:
●Petroleum and petrochemical industry: oily sewage, light oil, dirty oil, heavy oil, crude oil transmission, gasoline, diesel sweeping, methanol, ethanol unloading station can use rotor pump, instead of submerged pump and diaphragm pump.
● Municipal industry: excess sludge with a solid content of 5% or less, return sludge transport, lifting treatment, centrifuge feed pump, and activated carbon for waterworks.
● Fecal waste water: the transportation of high-viscosity manure on the farm, the transportation of domestic wastewater, and the transportation of kitchen waste.
● Mobile pump truck: municipal tap water drainage, flood control and drainage, farmland irrigation.
High viscosity rotor pump failure solution:
Germany's Kaisen Pump Industry High-viscosity Rotor Pumps deliver high-viscosity liquids (such as synthetic rubber, resins, fiber polymerization fluids, etc.) in the petrochemical industry. Although high-viscosity rotor pumps are durable, there are always some on-site conditions. There are three faults and common faults. Explain the solution here.
1. Abnormal vibration and noise
Because of the high viscosity of the working medium of the high-viscosity rotor pump, the suction phenomenon easily occurs and a large noise is excited. The viscosity of the medium transported by the high-viscosity rotor pump determines the ease with which the medium flows. During the transport process, changes in flow and pressure, and cracking of the bubbles are common causes of noise, and noise also affects the service life of high-viscosity rotor pumps.
Countermeasure: The working pressure of the high viscosity rotor pump with high pressure for frequent work should be 1-2 pressure levels lower than the rated pressure of the pump.
2, no export pressure or lack of pressure
The pump does not produce pressure, it is just the output flow. Low or no pressure, clarifying that the high viscosity rotor pump does not inhale liquid or leaks severely.
Countermeasure: When the output power of the motor is too small, if the displacement of the high-viscosity rotor pump is too large or the pressure is too high, a lack of pressure will also occur. Of course, when the pressure gauge is damaged, there is no pressure. At this time, a new pressure gauge can be replaced for inspection.
3, no flow or lack of fluid
If it is confirmed that the pump has no flow output, it may be because the pump device is wrong, the pump has a problem in steering, or the inhalation side (inlet and suction pipe) is infarged, the outlet check valve is reversed or stuck, or it may be driven. The shaft broke. High-viscosity rotor pumps can cause a lack of fluid when the speed is too low. This is often caused by slippage or lack of power in the drive installation.
Countermeasures: Check the actual speed of the gear pump, the connection of the pipeline, the pump and the motor, and the power matching status.
位于Schw?bischGmünd的凱森Kaysen泵業有限公司是世界*的各種流體水泵和隔膜泵制造商之一。60多年來，凱森以“制造”的可靠性和質量達到了*標準。憑借我們?nèi)娴漠a(chǎn)品組合，我們支持世界各地的客戶成功掌握供水，采礦，工業，化工，造紙，電力，食品，制藥，污水和海上行業的苛刻抽水任務。作為上述領域創新技術的*供應商，我們是液體需要安全，高效和經濟運輸?shù)?合作伙伴。
凱森始終堅持“重質量，講信譽”為宗旨。產品現暢銷全國各地，并已逐步開發海外市場。公司多次被評為“重合同講信用”企業，深得用戶的信賴和廣泛的贊譽。
The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.
