|
- 品牌：KAYSEN
- 貨號：KS5893569
- 發布日期： 2019-10-11
- 更新日期： 2025-08-21
| 外型尺寸 | |
| 品牌 | KAYSEN |
| 貨號 | KS5893569 |
| 用途 | 抽水、化工、制藥、石油、冶金、染料、冶煉、電力、電鍍、農藥、造紙、食品、紡織等行業酸洗工藝、制酸制堿、噴漆工藝、有色金屬冶煉中的電解液輸送、離子膜項目中的氯水輸送、廢水處理、電鍍、農藥領域。 |
| 型號 | KAYSEN |
| 工作壓差 | 0 |
| 制造商 | |
| 壓力環境 | 常壓 |
| 介質溫度 | 250℃ |
| 驅動方式 | 電動 |
| 適用介質 | 水 |
| 是否進口 |
進口導熱油泵-油泵-德國KAYSEN泵業
GERMANY KAYSEN PUMP CO .,LTD
進口導熱油泵采用自熱散熱結構，改變了傳統的水冷卻結構，使結構簡單，體積小，節約運行費用，性能好，使用可靠，基本結構形式為單級單吸懸臂式腳支撐結構，泵的為軸向吸入，出口為中心垂直向上，和電機同裝于底座上。 導熱油泵的支撐采用了雙端球軸承支撐的結構形式，前端采用潤滑油潤滑，后端采用潤滑脂潤滑，中間有一導油管，用以隨時觀察密封情況和回收導熱油。
進口導熱油的材質選擇決定耐溫：
進口導熱油泵全部都采用鑄鋼材質，鑄鋼含錳 11％～14％的高猛鋼能耐沖擊磨損，多用于礦山機械、工程機械的耐磨零件用在有腐蝕或者650℃以上高溫條件下工作的零件，如化工用閥體、泵、容器或者大容量電站的汽輪機殼體等。保證導熱油泵在高速、高溫情況的長時間運轉。其材質采用普通生鐵鑄件來替代導熱油泵的泵體及葉輪材質，這樣做是*不可以的，本身導熱油泵使用溫度就很高，生鐵鑄件一旦遇冷就會有產生爆炸的危險。 導熱油泵材質 所以泵的安全隱患真的很大。提醒各各個使用廠家要提高重視，同時經過一些不正規廠家立即停止這種不道德而且危險的作為。導熱油泵就是一種理想的熱油循環泵或者作載熱體輸送泵，是熱交換設備上比較理想的配套用泵。 磁力驅動無泄漏熱油泵在原有泵的基礎上改進密封工藝采用永無泄漏高溫磁力密封使導熱油泵終身無泄漏，電機軸和導熱油泵泵軸沒有接觸、無摩擦，所以導熱油泵在運轉中比普通導熱油泵噪音低的多、更加平穩、使用壽命更長，阻絕了以往導熱油泵跑、冒、滴、漏的現象。同樣使用溫度能達到≤400℃。
主要特點：
●采用填料密封和機械密封相結合的形式，填料密封用耐高溫的填料，具有良好的熱態適應性，而機械密封則采用機械強度高，耐磨性好的硬質合金材料，保證了高溫情況下的密封性能。
●采用聚四氟乙烯(簡稱PTFE)做唇形密封，使密封性能產生了飛躍，比橡膠類密封可靠性提高25倍，耐腐蝕性能極強。
主要應用：
導熱油泵的技術先進、效率高，在熱的狀態下可以長期穩定運轉并且無泄漏，無附加冷卻系統，使用安全可靠等一系列特點，在我國的載熱體加熱系統中得到了廣泛的應用，已經進入石油、制藥、紡織、印染、化工、橡膠、塑料、筑路、食品等其他工業領域。
導熱油泵的維護與保養：
導熱油泵的技術先進、效率高，在熱的狀態下可以長期穩定運轉并且無泄漏，無附加冷卻系統，使用安全可靠等一系列特點，在我國的載熱體加熱系統中得到了廣泛的應用， 下面是凱森泵業為廣大客戶分析導熱油泵保養維護小常識：導熱油泵是國內外熱循環交換設備中最不可以缺少的泵類傳輸推動設備，由于這個設備高速運轉工作，使用量大，在整個熱交換設備中屬于容易損壞設備，雖說屬于容易損壞設備，如果良好的保養和維護工作跟得上的話，照樣可以使用的很長時間。 導熱油泵使用雖然跟季節沒有很大的關系，但連續工作一段時間以后（一般規定2000小時左右），定期更換泵體軸承腔里的潤滑油，即可延長泵軸、軸承、密封地使用時間,導熱油泵是葉輪式離心泵類產品，最核心運轉部件就是軸承了，密封以及軸的加工精度，及時維護這幾個部位地關鍵工作就是定期更換泵腔內潤滑油，根據換掉的廢潤滑油能判斷出導熱油的質量以及內部雜質多少及密封磨損程度，以便于及時更換相對應的部件！
The heat-conducting oil pump adopts self-heating heat-dissipating structure, which changes the traditional water-cooling structure, makes the structure simple, small in size, saves operating cost, has good performance and is reliable in use. The basic structure is a single-stage single-suction cantilever foot support structure, and the pump is imported. For axial suction, the outlet is centered vertically upwards and mounted on the base with the motor. The support of the heat transfer oil pump adopts the structure supported by the double-end ball bearing. The front end is lubricated with lubricating oil, the rear end is lubricated with grease, and the middle end has a guide oil pipe for observing the sealing condition and recovering the heat transfer oil at any time.
The material selection of the heat transfer oil determines the temperature resistance:
The heat transfer oil pumps are all made of cast steel. The high-strength steel with 11%~14% manganese in cast steel can withstand impact and wear. It is used in the wear-resistant parts of mining machinery and engineering machinery for corrosion or high temperature operation above 650 °C. Parts, such as chemical valve bodies, pumps, containers, or turbine housings for large-capacity power stations. Ensure long-term operation of the heat transfer oil pump at high speed and high temperature. The material is made of ordinary cast iron castings instead of the pump body and impeller material of the heat transfer oil pump. This is absolutely impossible. The temperature of the heat transfer oil pump itself is very high. Once the cast iron castings are cold, there is a danger of explosion. Heat transfer oil pump material The safety hazard of the pump is really great. Remind each manufacturer to pay more attention, and at the same time, some unscrupulous and dangerous actions are immediately stopped by some informal manufacturers. The heat transfer oil pump is an ideal hot oil circulation pump or a heat carrier pump, which is an ideal matching pump for heat exchange equipment. The magnetic drive non-leakage hot oil pump improves the sealing process on the basis of the original pump. The non-leakage high temperature magnetic seal is used to make the heat transfer oil pump have no leakage for life. The motor shaft and the heat transfer oil pump pump shaft have no contact and no friction, so the heat transfer oil pump is more normal in operation. The heat transfer oil pump has much lower noise, more stable and longer service life, which prevents the phenomenon of running, running, dripping and leaking of the heat transfer oil pump. The same temperature can be used to reach ≤400 °C.
main feature:
●It adopts the combination of packing seal and mechanical seal. The packing is sealed with high temperature resistant filler and has good thermal adaptability. The mechanical seal uses high hardness and good wear resistance of hard alloy material to ensure high temperature. Sealing performance in case.
●Using imported PTFE (abbreviated as PTFE) for lip seal, the sealing performance has made a leap, the reliability of rubber seal is 25 times higher, and the corrosion resistance is extremely strong.
main application:
The heat transfer oil pump has advanced technology, high efficiency, long-term stable operation and no leakage in the hot state, no additional cooling system, safe and reliable use, and has been widely used in China's heating medium heating system. Has entered the petroleum, pharmaceutical, textile, printing and dyeing, chemical, rubber, plastics, road construction, food and other industrial areas.
Maintenance and maintenance of the heat transfer oil pump:
The heat transfer oil pump has advanced technology, high efficiency, long-term stable operation and no leakage in the hot state, no additional cooling system, safe and reliable use, and has been widely used in China's heating medium heating system. The following is the analysis of the maintenance and repair of the heat transfer oil pump for the customers of Germany Kaisen Pump Industry: the heat transfer oil pump is the most indispensable pump transmission and promotion equipment in the domestic and international thermal cycle exchange equipment. Because of the high speed operation of this equipment, the use amount is large. It is easy to damage the equipment in the whole heat exchange equipment. Although it is easy to damage the equipment, it can be used for a long time if good maintenance and maintenance work can be done. Although the use of the heat transfer oil pump has no great relationship with the season, after a period of continuous operation (generally 2,000 hours or so), the lubricating oil in the pump bearing cavity can be replaced regularly to extend the use time of the pump shaft, bearing and seal. The heat transfer oil pump is an impeller centrifugal pump. The core operating components are the bearing, the seal and the machining accuracy of the shaft. The key task of timely maintenance of these parts is to periodically replace the lubricating oil in the pump chamber. Can judge the quality of the heat transfer oil and the amount of internal impurities and seal wear, so as to replace the corresponding parts in time!
Cutting submersible sewage pump
Diving flow booster
Submersible mixed flow pump
Submersible return pump
Corrosion resistant sewage pump
Submersible mixer
位于Schw?bischGmünd的凱森Kaysen泵業有限公司是 *的各種流體水泵和隔膜泵制造商之一。60多年來，凱森以“制造”的可靠性和質量達到了*標準。憑借我們?nèi)娴漠a(chǎn)品組合，我們支持 各地的客戶成功掌握供水，采礦，工業，化工，造紙，電力，食品，制藥，污水和海上行業的苛刻抽水任務。作為上述領域創新技術的*供應商，我們是液體需要安全，高效和經濟運輸?shù)?合作伙伴。
凱森始終堅持“重質量，講信譽”為宗旨。產品現 全國各地，并已逐步開發海外市場。公司多次被評為“重合同講信用”企業，深得用戶的信賴和廣泛的贊譽。
The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.
